Product Accessories
February 15, 2010
| Product Name | Description | Price |
Stainless Steel |
| Subplate | 3/4" X 4 1/2" X 12" Not for the Tailstock | $365.00 | N/A |
| Tailstock Assembly | Tailstock Unit and Base Plate | $891.00 | $1276.00 |
| Tailstock Portion | Tailstock Unit Only, No Base Plate | $425.00 | $586.00 |
| Tailstock Base Plate | Base Plate Only | $478.00 | $675.00 |
| Tailstock Center Pin | $66.00 | $85.00 | |
| Collet Holder | Threaded Collet Insert | $148.00 | $203.00 |
| Collet Nut for Grindit and Indexer | Draw Bar for the Indexer or Grindit | $45.00 | $60.00 |
| Collet Nut for Flatspin | Flat, Round Nut for Flatspin | $45.00 | N/A |
| Collet Part Stop | Fits into Rear ID of the Indexer or Grindit | $45.00 | N/A |
| Adjustable Stops | Fits on OD of the Newbould Faceplate | $22.00 | N/A |
| 4" Buck Chuck | 3-Jaw; Screws onto Newbould Faceplate | $685.00 | N/A |
| V-Block (Bare) | No Guide Rails or Clamp | $390.00 | $548.00 |
| V-Block Clamp | $48.00 | $68.00 | |
| V-Block Guide Keys (Pair) | 1 Pair | $165.00 | $229.00 |
| V-Block Part Stop | Fits into Rear ID of Indexer or Grindit | $67.00 | N/A |
| V-Block Washers | Spring Washers for V-Block Screws (12) | $6.00 | $8.50 |
| Magnetic Chuck 4" | Ready to Use with Newbould Adapter | Call for Price | N/A |
| Herman Schmidt 4" MAGCHUCK | Ready to Use with Newbould Adapter | $1075.00 | N/A |
| Chuck Adapter | Alone | $225.00 | N/A |
| Wedge | Locating Wedge for #202 Indexer | $39.00 | N/A |
| Face Adapter 4" | With Shank for Re-1992 #202 Indexers | $221.00 | N/A |
| Indexing Plates | Complete Set of 4 | $335.00 | N/A |
| Indexing Plate | Any Single Plate | $305.00 | N/A |
| Handle for Grindit | 2-Piece Joined Assembly | $115.00 | N/A |
| Flatspin Lockbar | Stainless Bar to Lock-in Collet Nut | $35.00 | N/A |
| EDM 20mm Adapter | For 3R, Yuhasa or Erowa Electrode Making | $21.00 | N/A |
| EDM 20mm Adapter | For 3R, Yuhuasa or Erowa Electrode Making | $405.00 | N/A |
| EDM Submerge Kit | Includes: Adapter, Hose, and Pressure Regulator | $132.00 | N/A |
| Angle Dresser Datum | Plastic Indicator with Red Line | $22.00 | N/A |
| Grease Package | Includes: Tube of Grease, Grease Gun, and Fitting | $58.00 | N/A |
| Direct Drive System | Flatspin 2 Pulleys & Belt | $291.00 | N/A |
| Direct Drive System | Grindit/Indexer 2 Pulleys & Belt | $324.00 | N/A |
| Spin Fixture Rebuild | Standard Unit Includes V-Block & 5-C | $840.00 | N/A |
| Ceramic Bearing Option | Adds Ceramic Brgs. to Standard Price | $325.00 | N/A |
Stainless Steel Accessories: Call for Price
10826 Mercer Pike, Meadville, PA 16335 Phone (814) 337-8155 Fax (814) 337-2900